    |
Technical data sheet for concrete products
Concrete: C 50/60 (SCC)
- Concrete quality: B65
- Reinforced concrete: BA
- Exposure class: XC4, XD3, XS1, XF4, XA3; chemically moderately aggressive
- Requirement: W/C ratio < 0.45 (minimally 350 kg cement/m³)
- Water absorption: Average 5%
- Concrete cover: Minimally 25 mm, but usually 30-35 mm
- Steel quality: FeB 500
- Fire-resistance: Up to 60 minutes
- SCC: Self-compacting concrete
Concrete mixture:
- Round sand 0/4
- Broken limestone 6/10
- Limestone powder
- Cement CEM II / A-LL 42.5 R
- All products are certified by BENOR
General product specifications:
- Retaining wall with standard load:
- The maximum load, including a variable load of 1,000 kg/m2 up to the top side of the retaining wall, is comparable with 3.5 tonnes of axle load, or filling with earth up to a maximum slope gradient of 30° and a specific mass of 1,800 kg/m3 (see load table). Retaining wall with a heavier load:
- Retaining wall with a heavier load:
- A maximum load, including a variable load of 2,500 kg/m2 up to the top side of the retaining wall, is comparable with 10 tonnes of axle load, or filling with earth up to a maximum slope gradient of 30° and a specific mass of 1,800 kg/m3 (see load table).
- For retaining and silo walls, a dimensional tolerance of ± 5 mm is valid for the length, width and height.
CBS Concrete maintains the right to carry out possible modifications with advance notification.