Corner solutions for agri walls
PRECAST CONCRETE RETAINING WALLSÂ IN 1 OR 2 PARTS FOR CORNER FORMATION
With most L-shaped walls, it’s possible to create a 90° interior corner in a single piece. Corners made in a fixed formwork are fixed corners.
If this is not possible, it is possible to work with mitered L-walls (left or right) that form an angle together.
CORNER ELEMENTS FOR L-WALLS
CORNER ELEMENTS FOR T-WALLS
TWO-PART 90° CORNER (2 X 45°) FOR L-WALLS
FIXED ANGLE
These corner walls are provided only for our light range of silo walls:
CLF10A(M) (page 11) and the CTA(M) (page 13)
Sliding elements
Corner elements for L-walls
Corner elements for T-walls
Angle fixe et en deux parties
Two-part 90° corner (2 x 45°)
for L-walls
Two-part 90° corner (2 x 45°)
+ corner column for L- and
CLTAMVH
CLAVH
Fixed angle
TYPES OF LIFTING HOOKS
The following lifting hooks are required to move the walls.
See technical sheet for lifting hooks needed for different types of walls.
Ball head anchors (1) = KKA
Ring transport anchors (2) = RTA
PVC BATTENS
PVC battens of 3 cm are placed between the walls. Advantages are: they will not crack or splinter, in addition, the battens do not absorb moisture and cannot rot. They retain their mechanical properties at temperatures between -18 and + 50 degrees Celsius.
To use less Sikaflex, foam joints are also placed between the high walls to reduce the cost.
SEALING
SIKAFLEX
For walls placed side by side, we apply a Sikaflex joint sealant with a filler gun. The installer applies Sikaflex to each side of the wall to create a strong joint. This is called sealant.
CBS Beton can supply the backfill strips, foam joints, joint gun and Sikaf- lex joint sealant.
