L-walls DLF10GS range, FOR HEAVIER LOADS
3 FORMULAS WALLS AND THEIR USES
FORMULA 2: WALLS FOR HEAVY OVERLOAD
DLF10GS: L-WALL WITHOUT HEEL
Engineered for evenly distributed loads up to 25 kN/m2 and 40 kN/m2 with edge distance 1 m for heavy traffic.
DLF10GSZ: L-WALL WITH HEEL
Used with low bearing capacity of the substrate. Engineered for evenly distributed loads up to 25 kN/m2 and 40 kN/m2 with edge distance 1 m for heavy traffic.
DLF10GSR: L-WALL WITH HEEL FOR REVERSE PLACEMENT
Engineered for evenly distributed loads up to 25 kN/m2.
DLF10GS L-WALLS FOR HEAVIER LOADS
Top thickness
Always 10 cm
Standard lengths
1 m - 2 m - 4 m
Connection
Tongue and groove
Top finish
Rounded bevels
Finish
Smooth
Special features
Sand gap
Concrete quality
C 60/75
DLF10GS L-WALLS FOR HEAVIER LOADS
DLF10GSZ WALLS FOR HEAVY OVERLOAD, WITH HEEL
DLF10GSRZ THE REAR SIDE IS UNDER LOAD
DLF10GS - DLF10GSZ - DLF10GSRZ
Walls for heavy loads
POSSIBLE VARIATIONS
beveled wall
a wall mitred
ACCESSORIES FOR INSTALLATION RETAINING WALLS
Om de wanden te verplaatsen zijn volgende hefhaken vereist.
See technical sheet which lifting hooks are needed for which type of walls.
Ring Clutches (1) = KKA
Anchor pin ring (RTA)
Lifting loop anchor = MRD24 - MRD42 (2)